Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 89 / 404

5-9
Chapter 5: Ethernet Modules
Figure 5-5. SBM-XEM-002/M 10-Gigabit Pass-through Module
NOTE: The SBM-XEM-002/M 10-Gigabit pass-through module must be
connected to another 10-Gigabit Ethernet switch module in order to operate. If
you connect it to a 10/100/1000 switch, it will not work.
Table 5-12. SBM-XEM-002/M 10-Gigabit Pass-through Module Interface
Item Description
1 Module Release Handles
2 10-Gbp/s Uplink SFP+ Ports
3 RJ45 Ethernet Port for conncection to console for mini-CMM
4 “Initiation OK” LED for mini-CMM
5 Reset Button for mini-CMM
Table 5-13. SBM-XEM-002/M 10-Gigabit Pass-through Module Features
Feature Description
Internal/External Ports
Internal: Fourteen 10-Gbps downlink ports to internal 10-Gbps Mezzanine
Add-on Card / External: fourteen 10-Gbps SFP+ uplink ports
Remote Management NA
Protocols NA
Power Consumption ~30.6W
2 3 4
1 5