Supermicro SuperBlade SBM-GEM-X2C+, User Manual

Page: 393 / 404

B-3
Appendix B: LED Descriptions
B-3 SBM-XEM-X10SM 10G and SBM-XEM-F8X4SM
Ethernet Switch LED Descriptions
SBM-XEM-X10SM and SBM-XEM-F8X4SM10-Gigabit Ethernet switch module LEDs
are found below in
Table B-6 .
Table B-4. SBM-XEM-X10SM Ethernet Switch LEDs
LED State Indication Description
10G Port LED (left)
Link Up/Available
Off Port is not available
Amber Port is available and link down
Green Link up
10G Port LED (right)
Link speed/Activity
Off No activity
Amber Blink Speed 1G activity
Green Blink Speed 10G activity
Switch Fault Indicator
Off Switch is in normal operation
Red Switch is failed
Switch Available
Indicator
Off Switch firmware is in initialization state.
Green Switch firmware INIT OK and ready.
CMM Available
Indicator
Off CMM is not active
Blue blink CMM is active
RJ45 1G Switch Port
(left)
OFF Link down, no activity
Solid Green Link up
Green blink Activity
RJ45 1G Switch Port
(right)
Off Speed 10Mbps
Green Speed 100Mbps
Amber Speed 1000Mbps
RJ45 CMM Port (left)
Off No activity
Green blink Activity
RJ45 CMM Port
(right)
Off Link down
Green Speed 100/10Mbps
Amber Speed 1000Mbps