8
SuperBlade SBI-6119R-C3N/T3N User's Manual
Chapter 1
Introduction
1.1 Overview
This user’s manual covers the SBI-6119R-C3N/T3N SuperBlade module. These blade modules
are compact self-contained servers that connect into a pre-cabled enclosure that provides
power, cooling, management and networking functions. One SBE-610J(B)-822/622/422
enclosure (with up to eight 2200W power supplies) can hold up to ten SBI-6119R-C3N/T3N
SuperBlade units.
In this manual, “blade system” refers to the entire system (including the enclosure and blades
units), “blade” or “blade unit” refers to a single blade module, “Node” refers to a single node
in each blade module and “blade enclosure” is the chassis that the blades, power supplies
and modules are housed within.
Please refer to our website for information on operating systems that have been certified for
www.supermicro.com/products/superblade/
Note: For your system to work properly, please follow the links below to download all
necessary drivers/utilities and the user’s manual for your server.
Supermicro product manuals:
http://www.supermicro.com/support/manuals/
Product drivers and utilities:
https://www.supermicro.com/wftp/driver
Product safety information:
http://www.supermicro.com/about/policies/safety_information.cfm
If you have any questions, please contact our support team at:
A complete list of safety warnings is provided on the Supermicro website at
http://www.supermicro.com/about/policies/safety_information.cfm.
1.2 Product Checklist of Typical Components
Your blade module ships with its B11SRE-CPU mainboard already installed in its chassis.
Memory, hard disk drives and the CPU must all be installed by the user after shipment. See
Chapter 2: "Setup and Installation" for details on installation of these components.
Typical support modules for systems with the SBI-6119R-C3N/T3N SuperBlade module when
mounted in an 6U enclosure system include the following:
•
MBM-CMM-001 or MBM-CMM-FIO CMM module (up to two)
•
MBM-XEM-002 10G switch modules (up to two)
