SuperBlade SBI-6119R-C3N/T3N User's Manual
50
Flow Control
This feature allows the user to set the flow control for Console Redirection to prevent data
loss caused by buffer overflow. Send a "Stop" signal to stop sending data when the receiving
buffer is full. Send a "Start" signal to start sending data when the receiving buffer is empty.
The options are None, Hardware RTS/CTS, and Software Xon/Xoff.
Data Bits, Parity, Stop Bits
The status of each item above is displayed.
PCIe/PCI/PnP Configuration Sub-menu
PCI Bus Driver Version
The installed version for the PCI Bus Driver is static displayed here for your information.
PCI Devices Common Settings
SR-IOV Support
If the system has SR-10V capable PCIe device, this option Enables or Disables single root
I/O virtualization support.
MMCFG Size
This setting selects the MMCFG size. Options include 64M, 128M, 256M, 512M, 1G and 2G.
MMIO High Base
Use this setting to select the MMIO High Base. Options include 56T, 48T, 24T, 16T, 4T and 1T.
MMIO High Granularity Size
This setting selects the allocation size used to assign MMIOH resources. The total MMIOH
space can be up to 32xgranularity. Per stack MMIOH resource assignments are multiples of
the granularity where 1 unit per stack is the default allocation. Options are numbers 1G~1024G
where 256G is the default.
Above 4G Decoding
Select Enabled to decode a 64-bit PCI device in the space above 4G Address. The options
are Enabled and Disabled.
PCI Devices Option ROM Settings
Onboard Video
Use this setting to control the execution of UEFI and Legacy Video OPROM on your system.
Options include Disabled, Legacy or UEFI.
