Supermicro SuperBlade SBI-4129P-C2N, User Manual

Page: 53 / 96

3-23
Chapter 3: Setup and Installation
Refer to the manuals on your SuperBlade CD-ROM for further details on the Virtual
Media (CD-ROM or Drive Redirection) sections of these two utility programs.
3-9 Management Software
System management may be performed with either of three software packages:
IPMIview , IPMItool or a Web-based Management Utility . These are designed to provide
an administrator with a comprehensive set of functions and monitored data to keep tabs
on the system and perform management activities.
Refer to the manuals on your SuperBlade CD-ROM for further details on the various
functions provided by these management programs.
3-10 Configuring and Setting up RAID
Each blade module that supports two or more hard drives may be used to create a RAID
array. The procedures for doing this vary depending upon the blade model chosen for
your SuperBlade system. For this module 0 and 1 is available for each node.
For RAID setup see http://www.supermicro.com/support/manuals/ under RAID
Installation Guides for more details.