SuperBlade SBI-4119MG-X User's Manual
48
u
Discard Changes and Exit
Use this link to discard changes and exit.
u
Delete Certification Sub-menu
Use this link to delete a certification previously enrolled.
Ram Disk Configuration Sub-menu
Disk Memory Type:
This setting specifies the type of memory to use from the available memory pool in the
system to create a disk. Options include
Boot Service Data
or Reserved.
u
Create Raw Sub-menu
Size (Hex)
In the field provided enter the valid RAM disk size. This should be in multiples of the RAM
disk block size.
Create & Exit
Select this option to create a new RAM disk with the given starting and ending address.
Discard & Exit
Select this option to discard the new RAM disk and exit.
u
Create from File Sub-menu
Use this to creat a RAM disk from a given file.
Remove Selected RAM Disk(s)
Use this setting to remove selected RAM disk(s) that have been already created.
iSCSI Configuration Sub-menu
iSCSI Initiator Name
Clicking on this setting will bring up a field where you can enter the worldwide unique name
of the iSCSI initiator. Only IQN format is accepted with a range of 4 to 223.
u
Add an Attempt
Use this link to add an attempt.
u
Delete Attempts
Use this link to delete an attempt.
