Supermicro SSE-G2252, User Manual

Page: 815 / 1401

Chapter 24: General Security Measures
Network Access (MAC Address Authentication)
– 826 –
C
OMMAND
U
SAGE
•
Specified addresses are exempt from network access authentication.
•
This command is different from configuring static addresses with the
mac-address-table static command in that it allows you configure a
range of addresses when using a mask, and then to assign these
addresses to one or more ports with the network-access port-mac-filter
command.
•
Up to 64 filter tables can be defined.
•
There is no limitation on the number of entries that can entered in a
filter table.
E
XAMPLE
Console(config)#network-access mac-filter 1 mac-address 11-22-33-44-55-66
Console(config)#
mac-authentication
reauth-time
Use this command to set the time period after which a connected MAC
address must be re-authenticated. Use the no form of this command to
restore the default value.
S
YNTAX
mac-authentication reauth-time seconds
no mac-authentication reauth-time
seconds - The reauthentication time period.
(Range: 120-1000000 seconds)
D
EFAULT
S
ETTING
1800
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
•
The reauthentication time is a global setting and applies to all ports.
•
When the reauthentication time expires for a secure MAC address it is
reauthenticated with the RADIUS server. During the reauthentication
process traffic through the port remains unaffected.
E
XAMPLE
Console(config)#mac-authentication reauth-time 300
Console(config)#