Supermicro SSE-G2252, User Manual, Page: 774 / 1401

Chapter 23: Authentication Commands
Secure Shell
– 785 –
N
OTE
:
The SSH server supports up to eight client sessions. The maximum
number of client sessions includes both current Telnet sessions and SSH
sessions.
N
OTE
:
The SSH server can be accessed using any configured IPv4 or IPv6
interface address on the switch.
ip ssh
authentication-
retries
This command configures the number of times the SSH server attempts to
reauthenticate a user. Use the no form to restore the default setting.
S
YNTAX
ip ssh authentication-retries count
no ip ssh authentication-retries
count – The number of authentication attempts permitted after
which the interface is reset. (Range: 1-5)
D
EFAULT
S
ETTING
3
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
Console(config)#ip ssh authentication-retires 2
Console(config)#
R
ELATED
C
OMMANDS
show ip ssh (789)
ip ssh server
This command enables the Secure Shell (SSH) server on this switch. Use
the no form to disable this service.
S
YNTAX
[ no ] ip ssh server
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
• The SSH server supports up to eight client sessions. The maximum
number of client sessions includes both current Telnet sessions and
SSH sessions.