Supermicro SSE-G2252, User Manual

Page: 758 / 1401

Chapter 23: Authentication Commands
AAA
– 769 –
C
OMMAND
U
SAGE
•
The accounting of Exec mode commands is only supported by
servers.
•
Note that the default and method-name fields are only used to
describe the accounting method(s) configured on the specified
server, and do not actually send any information to the
server about the methods to use.
E
XAMPLE
Console(config)#aaa accounting commands 15 default start-stop group
Console(config)#
aaa accounting
dot1x
This command enables the accounting of requested 802.1X services for
network access. Use the no form to disable the accounting service.
S
YNTAX
aaa accounting dot1x { default | method-name }
start-stop group { radius | | server-group }
no aaa accounting dot1x { default | method-name }
default - Specifies the default accounting method for service
requests.
method-name - Specifies an accounting method for service
requests. (Range: 1-64 characters)
start-stop - Records accounting from starting point and stopping
point.
group - Specifies the server group to use.
radius - Specifies all RADIUS hosts configure with the radius-
server host command.
- Specifies all hosts configure with the
tacacs-server host command.
server-group - Specifies the name of a server group configured
with the aaa group server command. (Range: 1-64 characters)
D
EFAULT
S
ETTING
Accounting is not enabled
No servers are specified
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
Note that the default and method-name fields are only used to describe
the accounting method(s) configured on the specified RADIUS or
servers, and do not actually send any information to the servers about the
methods to use.