Supermicro SSE-G2252, User Manual

Page: 746 / 1401

Chapter 23: Authentication Commands
User Accounts and Privilege Levels
– 757 –
level level - Specifies the privilege level for the specified command .
Refer to the default settings described for the access level
parameter under the username command. (Range: 0-15)
command - Specifies any command contained within the specified
mode .
D
EFAULT
S
ETTING
Privilege level 0 provides access to a limited number of the commands
which display the current status of the switch, as well as several database
clear and reset functions. Level 8 provides access to all display status and
configuration commands, except for those controlling various
authentication and security features. Level 15 provides full access to all
commands.
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
This example sets the privilege level for the ping command to Privileged
Exec.
Console(config)#privilege exec level 15 ping
Console(config)#
show privilege
This command shows the privilege level for the current user, or the
privilege level for commands modified by the privilege command.
S
YNTAX
show privilege [ command ]
command - Displays the privilege level for all commands modified
by the privilege command.
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
This example shows the privilege level for any command modified by the
privilege command.
Console#show privilege command
privilege line all level 0 accounting
privilege exec level 15 ping
Console(config)#