Supermicro SSE-G2252, User Manual, Page: 678 / 1401

Chapter 20: System Management Commands
Line
– 686 –
•
The timeout for Telnet cannot be disabled.
•
Using the command without specifying a timeout restores the default
setting.
E
XAMPLE
To set the timeout to two minutes, enter this command:
Console(config-line)#timeout login response 120
Console(config-line)#
disconnect
This command terminates an SSH, Telnet, or console connection.
S
YNTAX
disconnect session-id
session-id – The session identifier for an SSH, Telnet or console
connection. (Range: 0-8)
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
Specifying session identifier “0” will disconnect the console connection.
Specifying any other identifiers for an active session will disconnect an SSH
or Telnet connection.
E
XAMPLE
Console#disconnect 1
Console#
R
ELATED
C
OMMANDS
show ssh (790)
show users (662)
terminal
This command configures terminal settings, including escape-character,
lines displayed, terminal type, width, and command history. Use the no
form with the appropriate keyword to restore the default setting.
S
YNTAX
terminal { escape-character { ASCII-number | character } |
history [ size size ] | length length | terminal-type { ansi-bbs |
vt-100 | vt-102 } | width width }