Supermicro SSE-G2252, User Manual

Page: 667 / 1401

Chapter 20: System Management Commands
File Management
– 675 –
C
OMMAND
U
SAGE
•
This command is used in conjunction with the upgrade opcode auto
command to facilitate automatic upgrade of new operational code
stored at the location indicated by this command.
•
The name for the new image stored on the TFTP server must be SSE-
G2252-SERIES.BIX. However, note that file name is not to be included
in this command.
•
When specifying a TFTP server, the following syntax must be used,
where filedir indicates the path to the directory containing the new
image:
tftp://192.168.0.1[/filedir]/
•
When specifying an FTP server, the following syntax must be used,
where filedir indicates the path to the directory containing the new
image:
ftp://[username[:password@]]192.168.0.1[/filedir]/
If the user name is omitted, “anonymous” will be used for the
connection. If the password is omitted a null string (“”) will be used for
the connection.
E
XAMPLE
This shows how to specify a TFTP server where new code is stored.
Console(config)#upgrade opcode path tftp://192.168.0.1/sm24/
Console(config)#
This shows how to specify an FTP server where new code is stored.
Console(config)#upgrade opcode path ftp://admin:billy@192.168.0.1/sm24/
Console(config)#
upgrade opcode
reload
This command reloads the switch automatically after the opcode upgrade is
completed. Use the no form to disable this feature.
S
YNTAX
[ no ] upgrade opcode reload
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Global Configuration