Supermicro SSE-G2252, User Manual

Page: 649 / 1401

Chapter 20: System Management Commands
System Status
– 657 –
R
ELATED
C
OMMANDS
process cpu guard (742)
show process cpu
task
This command shows the CPU utilization per process.
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
Console#show process cpu task
Task Util (%) Avg (%) Max (%)
--------------- -------- -------- --------
AMTR_ADDRESS 0.00 0.00 0.00
AMTR_ASIC_COM 0.00 0.00 0.00
AMTRL3 0.00 0.00 0.00
AMTRL3_GROUP 0.00 0.00 0.00
APP_PROTOCOL_GR 0.00 0.00 0.00
APP_PROTOCOL_PR 0.00 0.08 1.00
AUTH_GROUP 0.00 0.00 0.00
AUTH_PROC 0.00 0.00 0.00
CFGDB_TD 0.00 0.16 1.00
CFM_GROUP 0.00 0.00 0.00
CLI_GROUP 0.00 0.00 0.00
CLI_PROC 0.00 0.00 0.00
CLITASK0 0.00 0.08 1.00
CLUSTER_GROUP 0.00 0.00 0.00
CLUSTER_TD 0.00 0.00 0.00
CMGR_GROUP 0.00 0.00 0.00
CORE_UTIL_PROC 0.00 0.00 0.00
DAI_GROUP 0.00 0.00 0.00
DHCPSNP_GROUP 0.00 0.00 0.00
DHCPSNP_TD 0.00 0.07 0.93
DHCPV6SNP_TD 0.00 0.00 0.00
DNS_RESOL_TD 0.00 0.00 0.00
DOT1X_SUP_GROUP 1.00 1.03 2.46
DOT1X_SUP_PROC 0.00 0.00 0.00
DRIVER_GROUP 1.00 1.18 3.03
DRIVER_GROUP_DI 0.00 0.00 0.00
Low Watermark If packet flow has been stopped after exceeding the high
watermark, normal flow will be restored after usaage falls beneath
the low watermark.
Maximum Threshold If the number of packets being processed by the CPU is higher
than the maximum threshold,the switch stops packet flow to the
CPU (allowing it to catch up with packets already in the buffer)
until the number of packets being processed falls below the
minimum threshold.
Minimum Threshold If packet flow has been stopped after exceeding the maximum
threshold, normal flow will be restored after usaage falls beneath
the minimum threshold.
Trap Status Shows if an alarm message will be generated when utilization
exceeds the high watermark or exceeds the maxmimum
threshold.
CPU Guard Operation
Current Threshold Shows the configured threshold in packets per second.
Table 20-4: show process cpu guard - display description
Field Description