Supermicro SSE-G2252, User Manual

Page: 284 / 1401

Chapter 13: Security Measures
Configuring HTTPS
– 291 –
2.
Select Show Information from the Step list.
3.
Use the sort key to display addresses based MAC address, interface, or
attribute.
4.
Restrict the displayed addresses by entering a specific address in the
MAC Address field, specifying a port in the Interface field, or setting the
address type to static or dynamic in the Attribute field.
5.
Click Query.
Figure 13-27: Showing Addresses Authenticated for Network Access
C
ONFIGURING
HTTPS
You can configure the switch to enable the Secure Hypertext Transfer
Protocol (HTTPS) over the Secure Socket Layer (SSL), providing secure
access (i.e., an encrypted connection) to the switch’s web interface.
C
ONFIGURING
G
LOBAL
S
ETTINGS FOR
HTTPS
Use the Security > HTTPS (Configure Global) page to enable or disable
HTTPS and specify the TCP port used for this service.
CLI R
EFERENCES
•
“Web Server” on page 776
C
OMMAND
U
SAGE
•
Both the HTTP and HTTPS service can be enabled independently on the
switch. However, you cannot configure both services to use the same
TCP port. (HTTP can only be configured through the CLI using the ip
http server command described on page 777 .)