Supermicro SSE-G2252, User Manual

Page: 199 / 1401

Chapter 8: Spanning Tree Algorithm
Displaying Interface Settings for STA
– 203 –
•
BPDU Filter – BPDU filtering allows you to avoid transmitting BPDUs
on configured edge ports that are connected to end nodes. By default,
STA sends BPDUs to all ports regardless of whether administrative edge
is enabled on a port. BDPU filtering is configured on a per-port basis.
(Default: Disabled)
•
Migration – If at any time the switch detects STP BPDUs, including
Configuration or Topology Change Notification BPDUs, it will
automatically set the selected interface to forced STP-compatible
mode. However, you can also use the Protocol Migration button to
manually re-check the appropriate BPDU format (RSTP or STP-
compatible) to send on the selected interfaces. (Default: Disabled)
W
EB
I
NTERFACE
To configure interface settings for STA:
1.
Click Spanning Tree, STA.
2.
Select Configure Interface from the Step list.
3.
Select Configure from the Action list.
4.
Modify any of the required attributes.
5.
Click Apply.
Figure 8-9: Configuring Interface Settings for STA
D
ISPLAYING
I
NTERFACE
S
ETTINGS FOR
STA
Use the Spanning Tree > STA (Configure Interface - Show Information)
page to display the current status of ports or trunks in the Spanning Tree.
CLI R
EFERENCES
• “show spanning-tree” on page 1045