Supermicro SSE-G2252, User Manual, Page: 1279 / 1401

Chapter 41: CFM Commands
– 1293 –
E
XAMPLE
Console#clear ethernet cfm errors domain voip
Console#
show ethernet cfm
errors
This command displays the CFM continuity check errors logged on this
device.
S
YNTAX
show ethernet cfm errors [ domain domain-name | level level-id ]
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
level-id – Authorized maintenance level for this domain.
(Range: 0-7)
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
Console#show ethernet cfm errors
Level VLAN MPID Interface Remote MAC Reason MA Name
----- ---- ---- --------- ----------------- ---------------- ----------------
5 2 40 Eth 1/1 ab.2f.9c.00.05.01 LEAK provider_1_2
Console#
Table 41-5: show ethernet cfm errors - display description
Field Description
Level Maintenance level associated with this entry.
VLAN VLAN in which this error occurred.
MPID Identifier of remote MEP.
Interface Port at which the error was recorded
Remote MAC MAC address of remote MEP.