Supermicro SSE-G2252, User Manual

Page: 1277 / 1401

Chapter 41: CFM Commands
– 1291 –
D
EFAULT
S
ETTING
All continuity checks are enabled.
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
All mep-up traps are suppressed when cross-checking of MEPs is enabled
because cross-check traps include more detailed status information.
E
XAMPLE
This example enables SNMP traps for mep-up events.
Console(config)#snmp-server enable traps ethernet cfm cc mep-up
Console(config)#
R
ELATED
C
OMMANDS
ethernet cfm mep crosscheck (1296)
mep
archive-hold-time
This command sets the time that data from a missing MEP is retained in
the continuity check message (CCM) database before being purged. Use
the no form to restore the default setting.
S
YNTAX
mep archive-hold-time hold-time
hold-time – The time to retain data for a missing MEP.
(Range: 1-65535 minutes)
D
EFAULT
S
ETTING
100 minutes
C
OMMAND
M
ODE
CFM Domain Configuration
C
OMMAND
U
SAGE
A change to the hold time only applies to entries stored in the database
after this command is entered.
E
XAMPLE
This example sets the aging time for missing MEPs in the CCM database to
30 minutes.
Console(config)#ethernet cfm domain index 1 name voip level 3
Console(config-ether-cfm)#mep archive-hold-time 30
Console(config-ether-cfm)#