Supermicro SSE-G2252, User Manual, Page: 1259 / 1401

Chapter 41: CFM Commands
– 1273 –
Console(config)#ethernet cfm ais level 4 md voip ma rd
Console(config)#
ethernet cfm ais ma
This command enables the MEPs within the specified MA to send frames
with AIS information following detection of defect conditions. Use the no
form to disable this feature.
S
YNTAX
[ no ] ethernet cfm ais md domain-name ma ma-name
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
ma-name – Maintenance association name
1
. (Range: 1-43
alphanumeric characters)
D
EFAULT
S
ETTING
Enabled
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
• Each MA name must be unique within the CFM domain.
• Frames with AIS information can be issued at the client’s maintenance
level by a MEP upon detecting defect conditions. For example, defect
conditions may include:
• Signal failure conditions if continuity checks are enabled.
• AIS condition or LCK condition if continuity checks are disabled.
• A MEP continues to transmit periodic frames with AIS information until
the defect condition is removed.
E
XAMPLE
This example enables the MEPs within the specified MA to send frames with
AIS information.
Console(config)#ethernet cfm ais md voip ma rd
Console(config)#
ethernet cfm ais
period
This command configures the interval at which AIS information is sent. Use
the no form to restore the default setting.
1. The total length of the MD name and MA name cannot exceed 44 characters.