Supermicro SSE-G2252, User Manual

Page: 100 / 1401

Chapter 5: Interface Configuration
Port Configuration
– 103 –
•
Type – Indicates the port type. (100BASE-FX, 1000BASE-T,
1000BASE SFP)
•
Name – Interface label.
•
Admin – Shows if the port is enabled or disabled.
•
Oper Status – Indicates if the link is Up or Down.
•
Media Type – Media type used.
•
Autonegotiation – Shows if auto-negotiation is enabled or disabled.
•
Oper Speed Duplex – Shows the current speed and duplex mode.
•
Oper Flow Control – Shows the flow control type used.
W
EB
I
NTERFACE
To display port connection parameters:
1.
Click Interface, Port, General.
2.
Select Show Information from the Action List.
Figure 5-3: Displaying Port Information
C
ONFIGURING
L
OCAL
P
ORT
M
IRRORING
Use the Interface > Port > Mirror page to mirror traffic from any source
port to a target port for real-time analysis. You can then attach a logic
analyzer or RMON probe to the target port and study the traffic crossing
the source port in a completely unobtrusive manner.
Figure 5-4: Configuring Local Port Mirroring
Source
port(s) Single
target
port