Quick Installation Guide
SSE-F3548S SSE-F3548SR
48 × 25GbE + 6 × 100GbE DC switch
Power Cords × 2
Rack-mounting kit (M3 flat head screws x 4; M4 pan head
screws x 2; M4 flat head screws x 2; M5 screws x 6; Cage
nuts x 6; Ear brackets x2; Rear brackets x2; Front
brackets(long) x 2; Front bracket(short) x 2)
RJ-45 to DB-9 serial console cable
Quick Installation Guide
Detailed installation instructions are contained in a User Manual
available on the Supermicro website at:
https://www.supermicro.com/products/accessories/Networking/SS
E-F3548S.cfm
Instructions for rack mounting using ear brackets are included in the
manual and summarized below.
The switch can be mounted in a standard 19-inch equipment rack or
on a horizontal surface.
The switch can be mounted in a rack using the supplied rack-
mounting kit.
The installation instructions are shown below:
Step 1. Install the ear brackets
A.
Secure the ear brackets to the switch with the M3 flat head screws.
Step 2. Install the front brackets
A.
Secure the front brackets to the switch with the M4 flat head
screws.
P.S. There are two types of front-brackets. Front-bracket-long can
support a rack between 850mm and 1000mm deep, and Front-bracket-
short can support a rack between 700mm and 850mm deep.
Step 3. Install the switch into a rack
A.
Secure the switch to a rack with the M5 screws and cage nuts.
Step 4 Install the rear brackets
A.
Secure the rear brackets to the rack with M5 screws and cage nuts.
Step 5 Secure the rear brackets
A.
Secure the rear brackets to the front brackets with the M4 pan
head screws.
SELECTING A SITE
MOUNTING
Ear bracket
M3 screw
Front-bracket
M4 screw
○
1
○
2
○
3
M5 screw
Rear-bracket
Cage nut
M4 screw
M5 screw
Cage nut
PACKAGE CONTENTS