Supermicro SCLA26 Chassis User's Manual
24
Installing Expansion Cards
The system can accommodate seven low-profile PCIe cards.
Installing an Expansion Card
1. Power down the system and remove the cover.
2. In the rear of the chassis, remove the blank PCI shield that covers the chassis slot.
3. Slide the expansion card into the expansion slot on the motherboard while aligning it
with the chassis slot in the rear of the chassis.
4.
Secure the expansion card shield onto the rear of the chassis with a screw.
Figure 3-4. Removing a Blank PCI Shield
Expansion Card
Chassis Slots
