Supermicro SBI-7127RG-E, User Manual

Page: 41 / 86

3-11
Chapter 3: Setup and Installation
Note: Though multiple DIMM memory module types and speeds may be supported, you
need to use DIMM memory modules of the same speed and type.
DIMM Installation
Warning: Exercise extreme care when installing or removing DIMM modules to prevent
any possible damage.
Installing DIMM Memory Modules
1. Power down the blade module (see "Powering Down a Blade Unit" on page 3-1 ).
2. Remove the blade from the enclosure and the cover from the blade (see
"Removing/Replacing the Blade Cover" on page 3-2 ).
3. Insert each DIMM vertically into its slot, starting with slots 1A and 2A. Pay attention
to the notch along the bottom of the module to prevent inserting the DIMM
incorrectly (see
Figure 3-14 ).
Figure 3-13. 8-Slot DIMM Numbering
CPU1
P1
-DIMMC1
CPU2
P1
-DIMMD1
P1
-DIMMB1
P1
-DIMMA1
P2
-DIMMG
1
P2
-DIMMH1
P2
-DIMMF1
P2
-DIMME
1