Supermicro SBA-7141M-T, User Manual

Page: 36 / 66

SBA-7141M-T Blade Module User’s Manual
4-6
CMOS Clear
JBT1 is used to clear CMOS and will also clear any passwords. JBT1 consists of two
contact pads located near the BIOS chip (#10 in
Figure 4-3 ).
Clearing CMOS
1. First power down the blade and remove it from the enclosure.
2. Remove the blade cover to access the mainboard (see Section : Removing/
Replacing the Blade Cover on page 3-2 for further details). Short the CMOS pads
with a metal object such as a small screwdriver.
3. Replace the cover, install the blade back into the enclosure and power it on.
4-3 Blade Unit Components
Figure 4-5. Exploded View of SBA-7141M-T Blade Module
1
4
4
3
2
5
6
3
3 3
4
4