Supermicro SBA-7141M-T, User Manual

Page: 26 / 66

SBA-7141M-T Blade Module User’s Manual
3-8
Figure 3-5. 16-slot DIMM Numbering
DIMM Installation
Installing Memory Modules
1. Power down the blade module.
2. Remove the blade from the enclosure and the cover from the blade.
3. Remove the air shroud that covers the DIMM slots.
4. Insert each DIMM vertically into its slot, paying attention to the notch along the
bottom of the module to prevent inserting the module incorrectly (see
Figure 3-6 ).
WARNING: Exercise extreme care when installing or removing DIMM modules
to prevent any possible damage.
Center of Board
Edge of Board
D
IMMB 1
B
DI
MMB 1
A
DI
MMB 2
B
DI
MMB 2
A
D
IMMC 2
A
DI
MMC 2
B
DI
MMC 1
A
DI
MMC 1
B
D
IMMD 1
B
DI
MMD 1
A
DI
MMD 2
B
DI
MMD 2
A
D
IMMA 2
A
DI
MMA 2
B
DI
MMA 1
A
DI
MMA 1
B
CPU3 CPU4
CPU1 CPU2