12
H11SSW-iN/NT User's Manual
Quick Reference Table
Jumper
Description
Default Setting
UID SW
Unit ID switch (push-button toggle switch ON/OFF)
Off
JBT1
Clear CMOS
Open (Normal)
JWD1
Watch Dog control
Pins 1-2 (Reset)
JDBG1
Debug Mode
Pins 1-2 (Normal)
JPL1
LAN Enable/Disable
Pins 1-2 (Enabled)
LED
Description
Status
LED1
UID LED
Blue: UID Activated
LED6
Power LED
On: Power On
LED7
BMC Heartbeat
Blinking: BMC Normal/Working
LED9
M.2-C2 Error
On: Detected Error on M.2-C2
LED11
M.2-C1 Error
On: Detected Error on M.2-C1
Connector
Description
Battery (BT1)
Onboard CMOS battery
SGPIO1, SGPIO2, SGPIO3
General Purpose Serial I/O ports 1/2/3
COM 1, COM 2
Rear panel COM port #1, Header for COM port #2
JCPLD1
Complex-Programmable Logical Device (CPLD) header
FAN 1~6
System cooling fan headers
Micro SD
Micro SD Port
JF1
Front control panel
JSEN1
Intel sensor header
JSD1, JSD2
SATA DOM power connector
JTPM1
Trusted Platform Module (TPM)/Port 80 connector
SATA0, SATA1
Internal SATA Ports
JL1
Chassis intrusion header
JOH1
Chassis overheat header
USB 0/1 (3.0)
Back panel USB 3.0 ports (USB 0/1)
USB 2/3 (3.0)
Back panel USB 3.0 ports (USB 2/3)
USB 4 (3.0)
USB 3.0 type A port (USB 4)
USB 6/7 (3.0)
Internal USB 3.0 header (USB 6/7)
IPMI
IPMI Header
JSXB1A, JSXB2, JSXB1C
Riser slots
CPU SLOT1
Expansion SLOT1
JPWR2
24-pin ATX power supply connector
JPWR1
12V 8-pin ATX CPU power connector
M.2-C1, M.2-C2
M.2 Slots
PWRI2C
Power supply SMBus I2C header
