FatTwin F619P2/3-FT User's Manual
27
Removing Nodes from the Chassis
Each of the eight individual nodes may be removed from the chassis separately. Note that
when a node is removed from the chassis, the hard drives located in the node will shut-down.
Removing a Node
1. Grasp the node by the handles on both sides of the front of the node.
2. Press down on the left handle to disengage the latch.
3. While holding down the left handle, carefully pull the node forward and out of the
chassis.
Removing the Cover from the Node
Removing the Node Cover
1. Remove the node from the chassis as described above.
2. Push the top cover toward the rear side of the node.
3.
Lift the cover up and off the node.
Figure 3-2. Removing the Node Cover
