9. For one M.2 SSD at a time, remove the plug from the standoff and allow the M.2 SSD to lift up at an angle before removing it from
the M.2 socket
To Install the BPN-ADP-2M2-1UB and M.2 SSDs:
1. Power down the system and remove the power cord from the rear of the power supply.
2. Use industry-standard anti-static equipment (such as gloves or wrist strap) and follow the precautions on page 3-1 to avoid
damage caused by ESD.
3. Remove the chassis from the rack
4. Take off cover and remove any DIMMs obstructing access to the BPN-ADP-2M2-
1UB’s socket
7. Install the standoffs in the appropriate holes that correspond with the form factor of the M.2 SSD to be installed (42mm, 60mm or
80mm length M.2 SSDs are allowed)
