26
Super B2SD2(1)-8C/12C/16C-TF MicroBlade Module User's Manual
IPMI CODE
IPMI CODE
+
MAC CODE
MAC CODE
BAR CODE
DESIGNED IN USA
RE
V:1.00
P2-SATA2
P1-SATA2
J2
J3
P1-BT1
P2-BT1
P1_JBT1
P2_JBT1
P1-JSD1
P2-JSD1
LEDM1
LEDM2
P2-JPT1
P1-JWD1
P2-JWD1
P1-JPME2
P1-JPT1
P1-JVRM1
P2-JVRM1
P2-JPME2
P2-JTPM1
P1-JTPM1
J27
AST
2500
AST
2500
J3
P1 M.2-P PCI-E 3.0X4
P2 M.2-P PCI-E 3.0X4
SATA DOM POWER
SUPERDOM
SATA DOM POWER
SUPERDOM
P2-DIMMD1 P2-DIMME1
P2-DIMMA1
1-2:NORMAL
2-3:ME MANUFACTURING MODE
CPU2
P2-JPME2
CPU1
P1-DIMME1
P1-DIMMD1
P1-DIMMA1
P1-DIMMB1
2-3:DISABLE
1-2:ENABLE
P2-JPT1:TPM
P1-
JP
ME2
1-2:NORM
AL
2-3:ME M
ANUF
AC
TURING MODE
CMOS CLEAR
P1-JWD1
2-3:NMI
1-2:RST
WATCH DOG
P1-JPT1:TPM
2-3:DISABLE
2-3:DISABLE
1-2:ENABLE
1-2:ENABLE
P2-JWD1
2-3:NMI
1-2:RST
WATCH DOG
TPM/PORT80
TPM/PORT80
P1-LEDBMC
P2-LEDBMC
P2-DIMMB1
B2SD2-8C-TF
DIMM Installation
1. Insert the desired number of DIMMs into
the memory slots For best performance,
please use the memory modules of the
same type and speed.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Press both ends of the module straight
down into the slot until the module snaps
into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
DIMM Removal
Press both release tabs on the ends of the
DIMM module to unlock it. Once the DIMM
module is loosened, remove it from the
memory slot.
Release Tabs
Notches
Press both notches
straight down into
the memory slot.
