A+ Server ASG -1014S-ACR12N4H User's Manual
18
2.3 Installing the Chassis
This section provides information on installing the chassis into a rack unit with the rails
provided.
The Toolless Rail System
The SC802 chassis uses a toolless rail system that does not need -- as the name implies
-- any hand tool to mount the rails and chassis into the server rack
. The toolless rail system
has locking mechanisms on each end of the rails that latch and lock onto the square mounting
holes which are located on the front and back of the server rack. When these rails are secure,
the chassis' left and right sides will simply rest on the inner rail 'lip' of these rails, which can
be freely pulled out or pushed in as needed. The chassis is then secured to the rack by two
thumb screws.
Insert the mounting ends of the rails into
the square mounting holes in 1U space
on the rack post
Figure 2-1. Toolless Rails
Left Rail
Right Rail
Inner Rail Lip
Mounting Ends
Mounting Ends
1U Space
Top Hook
Bottom Lock
Mounting End
Rack Post
