Chapter 2: Hardware Components
2-5
2-4 NC-SI Header
NC-SI Header
A Network-Controller Sideband Interface (NC-SI) header is located at JNCSI1 on
the add-on card. Connect an appropriate cable from this header to a motherboard
to provide the out-of-band (sideband) connection between the onboard Baseboard
Management Controller (BMC) and a Network Interface Controller (NIC) for remote
management. For the network sideband interface to work properly, you will need
to use a motherboard that supports NC-SI and also need to have a special cable.
Please contact Supermicro at www.supermicro.com to purchase the cable for this
header. See the layout below for the location of the JNC-SI1 header.
1. NC-SI header
1
JNCSI1
JP4
REV:1.00
AOC-S25GC-i4S
DESIGNED IN USA
SFP1
SFP2
SFP3
SFP4
D7
D6
D9
D8
D11
D10
D13
D12
E810 CAM1
