3-11
Chapter 3: Installation
3-8 Changing from InfiniBand to Ethernet mode
AOC-MHIBF-m1Q2G and AOC-MHIBF-m2Q2G are by default set to InfiniBand
mode. To change the setting to Ethernet mode, please follow the instructions below.
1. Double-check and make sure that the add-on card is detected. Run the Ispci
command:
[root@localhost ~]# lspci
| grep Mellanox
17:00.0 Ethernet controller:
Mellanox
Technologies
MT27520 Family [ConnectX-3 Pro]
2. If the setting remains unchanged, start MST:
[root@localhost ~]# mst start
Starting MST (Mellanox Software Tools) driver set
Loading MST PCI module - Success
[warn] mst_pciconf is already loaded, skipping
Create devices
Unloading MST PCI module (unused) - Success
