11
Chapter 1: Introduction
Note:
Table is continued on the next page.
Quick Reference Table
Jumper
Description
Default Setting
JBT1
CMOS Clear
Open: Normal, Short: Clear CMOS
JI
2
C1/JI
2
C2
SMB to PCI-E Slots Enable/Disable
Pins 1-2 (Enabled)
JPAC1
Audio Enable
Pins 1-2 (Enabled)
JPL1
LAN1 Enable/Disable
Pins 1-2 (Enabled)
JPL2
LAN2 Enable/Disable
Pins 1-2 (Enabled)
JPME2
Maufacturing Mode
Pins 1-2 (Normal)
JWD1
Watch Dog
Pins 1-2 (Reset)
LED
Description
Status
LED1
Power LED S3 Blink Function
Blinking Green: S3 function
LED2
System Power LED
Solid Blue: Power On
LED3
P5V_STBY Power LED
5V Standby Power Ready
Connector
Description
AUDIO FP
Front Panel Audio Header (not available on -L/-LV)
BT1
Onboard Battery
COM1 ~ COM3
COM Ports supported by Novuton 5523D
(COM1 in RJ45, COM1/2 support RS-232, COM3 supports RS-485)
EDP1
Embedded DisplayPort (see Note 1 on page 12) (A2SAV/-2C-L/-L only)
FAN1/FAN2
System/CPU Fan Headers (FAN1: CPU Fan)
HDMI/DP
High Definition Multimedia Interface/DisplayPort
I-SATA0/I-SATA1
Intel® SATA 3.0 Ports
JD1
Speaker Header
JF1
Front Control Panel Header
JGP1
General Purpose I/O Header
JL1
Chassis Intrusion Header
JMD1
M.2 PCI-E 2.0 X2 Slot / I-SATA0 Slot
JMP1
Mini-PCIe with mSATA / I-SATA1 (not available on -L/-LV)
JPH1
4-pin Power Connector for HDD devices (provides power from the motherboard to system HDD
devices)
JPW1
24-pin ATX Power Connector
JPV1
12V 4-pin Power Connector
JSD1
SATA DOM Power Connector
JSTBY1
Standby Power Header
JTPM1
Trusted Platform Module/Port 80 Connector
LAN1/LAN2
LAN (RJ45) Ports
M2_SRW2/M2_SRW3
M.2 Mounting Screws
mSATA/m-PCIE
mSATA/miniPCIE Slot (not available on -L/-LV)
M-SATA0 ~ M-SATA3
SATA Ports supported by Marvel 88SE9230 (not available on -L/-LV)
