Supermicro A+ AS -2114GT-DNR User Manual Download

Page: 99 / 126

Chapter 6: UEFI BIOS

Boot Mode Select

Use this item to select the type of device that the system is going to boot from. The options
are Legacy,

UEFI

, and Dual. The default setting is DUAL.

Legacy to EFI Support

This option Enables or

Disables

the system to boot to an EFI OS after the boot failed from

the legacy boot order.

FIXED BOOT ORDER Priorities

This option prioritizes the order of bootable devices that the system to boot from. Press
<Enter> on each entry from top to bottom to select devices.



Add New Boot Option

Use this feature to add a boot option to the boot order.

6.7 Boot

Use this tab to configure Boot Settings:

Summary of Contents for A+ AS -2114GT-DNR































































































































Search results

Summary of Contents for A+ AS -2114GT-DNR

Reviews:

Related manuals for A+ AS -2114GT-DNR

Brands by name

Popular brands

Supermicro A+ AS -2114GT-DNR, User Manual

Search results

Summary of Contents for A+ AS -2114GT-DNR

Reviews:

Related manuals for A+ AS -2114GT-DNR

Brands by name

Popular brands