Supermicro A+ AS-1114S-WTRT User Manual Download Page 96

Page: 96 / 131

A+ Server AS -1114S-WTRT User's Manual

Boot Mode Select

Use this item to select the type of device that the system is going to boot from. The options
are LEGACY, UEFI, and

DUAL.

The default setting is DUAL.

Legacy to EFI Support

This option Enables or

Disables

the system to boot to an EFI OS after the boot failed from

the legacy boot order.

FIXED BOOT ORDER Priorities

This option prioritizes the order of bootable devices that the system to boot from. Press
<Enter> on each entry from top to bottom to select devices.



Delete Boot Option

Use this feature to remove a pre-defined boot device from which the system will boot during
startup. The settings are [any pre-defined boot device].

6.7 Boot

Use this tab to configure Boot Settings:

Summary of Contents for A+ AS-1114S-WTRT




































































































































Search results

Summary of Contents for A+ AS-1114S-WTRT

Reviews:

Related manuals for A+ AS-1114S-WTRT

Brands by name

Popular brands

Supermicro A+ AS-1114S-WTRT, User Manual

Search results

Summary of Contents for A+ AS-1114S-WTRT

Reviews:

Related manuals for A+ AS-1114S-WTRT

Brands by name

Popular brands