A+ Server AS -1114S-WTRT User's Manual
18
Slide rail mounted equipment is not to be used as a shelf or a work space.
2.3 Installing the Rails
There are a variety of rack units on the market, which may require a slightly different assembly
procedure. This rail set fits a rack between 25.6" and 33" deep.
The following is a basic guideline for installing the system into a rack with the rack mounting
hardware provided. You should also refer to the installation instructions that came with the
specific rack you are using.
Identifying the Sections of the Rack Rails
The chassis package includes a rail set includes the outer rail pieces that attach to the rack.
Figure 2-1. Assembling the Outer Rails
Assembling the Outer Rails
Each outer rail comes in two sections that must be assembled before mounting onto the rack.
Assembling the Outer Rails
1. Identify the left and right outer rails by examining the ends, which bend outward. Match
the left front outer rail with the left rear outer rail and the same for the right rails.
2. Align the round post in the rear rail (B) with the round hole at the end of the slot in the
front rail (A), and slide the front section into the rear section.
Outer rail assembled
Secure to the
front of the rack
Secure to the
rear of the rack
Slide outer rails
together
Assembling the sections of
the outer rail
1
A
1
B
Round Hole
Bracket with
Square Pegs
