Supermicro 6038R-E1CR16H, User Manual, Page: 13 / 81

Chapter 2: Server Installation
2-5 2-4
S
UPER
S
TORAGE
S
YSTEM 6038R-E1CR16H User's Manual
2-5 Installing the System into a Rack
This section provides information on installing the S836 chassis into a rack unit with
the quick-release rails provided. There are a variety of rack units on the market,
which may mean the assembly procedure will differ slightly. You should also refer
to the installation instructions that came with the rack unit you are using.
Separating the Sections of the Rack Rails
The chassis package includes two rail assemblies in the rack mounting kit. Each
assembly consists of two sections: an inner fixed chassis rail that secures directly to
the server chassis and an outer fixed rack rail that secures directly to the rack itself.
Separating the Inner and Outer Rails
1. Locate the rail assembly in the chassis packaging.
2. Extend the rail assembly by pulling it outward.
3. Press the quick-release tab.
4. Separate the inner rail extension from the outer rail assembly.
Installing the Inner (Chassis) Rails
Installing the Inner Rails
1. Extend the inner rail toward the front of the rail assembly as far as possible,
then depress the locking tab to pull it completely out.
2. Place the inner rail on the side of the chassis aligning the hooks of the chas -
sis with the rail extension holes.
3. Slide the extension toward the front of the chassis.
4. You may secure the chassis with screws if desired.
5. Repeat steps 1-3 for the other inner rail.
Figure 2-2. Installing the Inner Rails
1
2
1
3
Warning: Do not pick up the server with the front handles. They are de -
signed to pull the system from a rack only.
Figure 2-1. Separating the Rack Rails
screw the handles the
outer rails for secure
purpose if necessary
F.
ABLECOM
DATE:2008/08/14
REV:2
SCREW
SCREW
COMPLETE
1
2
1
1
1
2
1
4
1
3
Rail Assembly
Extending the Rails
Quick-Release
Tab
Separating the Inner
Rail Extension