VINYL PICNIC TABLE INSTRUCTIONS Models: SP2400, SP2500, SP2400I, SP2500I
cess
Move all components except the table top from the lid of the
box. Place the lid, with the table top, on a flat surface and
tear the box at the corners for easier access.
Position the legs of the table
on the cross rails of the top
with the notch of the leg
inboard.
Pass the seat beam through the legs, leaving 10 - 3/4” on both sides as
shown.
Secure the seat beam to
the table leg as shown.
Drive screws into the cross rails on both the outside and inside face
of the leg as shown.
