INSTALLATION INSTRUCTIONS
STEP 1:
Remove the battery compartment door on
the back of the Top Tension Pro and connect the
9-volt battery (provided). Flip the on/off switch to
the on position and 3 numbers will appear. With
no pressure on the sensor disc, the display should
show a reading of 000, or - 000. Place the sensor
disc between your thumb and forefinger and press
gently. The numbers displayed should increase
with applied pressure, which indicates an operating
sensor. Turn the meter off and proceed with the
installation.
STEP 2:
Using the Velcro
®
fasteners provided,
mount the Top Tension Pro onto your machine.
Please be sure to place the Top Tension Pro close
enough to the tension guide, so the sensor disc
can easily reach the tension guide. (We recommend
placing the Top Tension Pro on top of the left front
handlebar. See photo on reverse.)
INCLUDED IN PACKAGE
1. Digital readout meter with
attached cable and
sensor disc
2. One 9-volt battery
3. Two stick-on cable
support hooks
4. Self-sticking Velcro
®
fasteners
5. Instruction sheet and
reference guide
DIGITAL THREAD TENSION SENSOR
for Handi Quilter Longarm and other machines
For video demonstration go to www.superiorthreads.com/top-tension-pro
Save these instructions.
Velcro® Fasteners
Cable Support Hooks
Digital Readout Meter and Sensor
9v Battery
1
3
4
2
www.superiorthreads.com
5/14
(Top Tension Pro)
STEP 3:
Add a cable support hook to the body of
your longarm machine, close to the head. This will
keep the sensor cable from moving around.
