51
Operator Console and Computer
Figure 5.8: Dyno Computer Desktop
Figure 5.7: Operator Console Controls
Use the power switch on the Dyno Computer and the power key switch on the Operator Console to turn
both systems ON. The Dyno Computer desktop will show on all screens once the computer operating
system has properly loaded.
Figure 5.9: NetDyn Loading
Figure 5.10: WinDyn Loading
Load Software
1. Locate the SuperFlow NetDyn program icon on the desktop and
double-click
the icon to load the
program.
2. Once NetDyn has been loaded, locate the SuperFlow WinDyn program icon on the desktop and
double-click
the icon to load the program.
a. The WinDyn initialization screen will show
and automatically close once the program
has been initialized. WinDyn will require
additional load time once the initialization
screen closes, wait approximately 15 to 30
seconds for WinDyn to load completely.
DO NOT attempt to reload the WinDyn software
once the initialization screen closes, wait an
additional 30 to 45 seconds before attempting to
reload the software.
IMPORTANT
5.0 Operation
