background image

INSTALLATION & OPERATION WARNINGS

When installing the VIVID LINQ and Android

TM

 tablet units in the vehicle, securely 

place the device so it does not obstruct the driver’s view of the road or interfere with 

vehicle operating controls, such as the steering wheel, foot pedals, or transmission 

levers. Do not place the Android tablet or VIVID LINQ in front of any airbag.

*Avoid cable routing that can interfere with pedal operation.

The windshield mount may not stay attached to the windshield in all circumstances. 

Do not place the mount where it will become a distraction if the mount should become 

detached. Keep your windshield clean to help ensure that the mount stays on the 

windshield.

WARNING Misapplication or misuse of this product could lead to a serious 

or fatal accident. Comply with all safety information in this manual, and your 

vehicle owner’s manual. Follow safety, installation and operating instructions in 

this User Manual to assure proper use.

PRODUCT HANDLING

Please observe all operating conditions relating to the Superchips VIVID.

This product is designed for normal room temperatures or temperatures suitable for 

humans. 

Please remove the product from the vehicle when not in use.

Do not leave the ARCHOS

TM

 tablet on the dashboard or windshield when not in use. 

If exposed to extreme temperature, the unit could become damaged. Remove 

the Android tablet from the vehicle if it falls within the following scenarios: 

  (1)  Vehicle interior is subjected to 140˚ F or higher.

  (2)  Vehicle interior is subjected to 32˚ F or lower.

Do not “stack” Superchips VIVID tuning with other unauthorized tuning products.  

“Stacking” performance-enhancing devices or other improper installation can cause 

power train failure on the road. Other products may have features incompatible with 

your VIVID device. Follow all installation and operating instructions, and do not stack 

products.

Unit is sealed and is not to be serviced by user.

Unit can be damaged by violent impact.

If the vehicle will be sitting for long periods of time without being started, disconnect 

the VIVID LINQ from the vehicles data port to prevent voltage draw from the battery.

NOTE: Dispose of this product consistent with local city and state codes. Return 

to your electronics supplier for proper handling.

Summary of Contents for ARCHOS43





































Reviews: