LED Canopy Light
WIFI-CON
Important: Read all instructions prior to installation.
FLD-CNL-60005-100W
Summary
This LED canopy light is great for parking garage lighting, gas
station lighting, drive-thru lighting, tunnel lighting, train stations, and
covered walkways. Using 60 LEDs (2 groups of 30), the canopy
light emits 10,000 lumens of powerful natural white illumination. The
100-watt LED light is a replacement for traditional 250-watt metal-
halide. A die cast aluminum housing with white powder coating and
an impact-resistant PMMA lens with UV inhibitors protect internal
components and LEDs. The durable fixture can be easily surface
mounted with its removable bracket or flush mounted with an
optional frame, FLD-FM1 (sold separately).
WARNING:
•
This product should be installed by a fully certified electrician in
accordance with local building and electrical codes.
• Due to risk of electric shock, ensure that the main power
source and circuit breakers are switched off before performing
any installation or wiring procedures.
• Do not install insulation within 2”(51mm) of any part of the
panel light fixture.
•
Ensure the junction box is securely mounted and will support
the weight of the fixture. Failure to properly support the fixture
during installation may cause damage or injury, for which the
manufacturer is not responsible.
ASSEMBLY
1.
Loosen Mounting Bracket Screws and
Remove Mounting
Bracket from Canopy Light before proceeding.
2.
Pull supply wires through Mounting Bracket. Attach the
mounting bracket to the junction box using Jbox provided
screws.
3.
Make all power connections. Connect black to black (Line),
white to white (Neutral), and green to green (Ground).
4.
Push connected wires through center hole of Mounting
Bracket.
5.
Align the light with the Mounting Bracket as shown
in
Figure 1
and lift the light, insuring Step Bracket fits into the
Mounting Bracket. Make sure it is flush to the top of Canopy
Light. Tighten the 4 Mounting Bracket screws until snug. Screws
must go under the first level of the step bracket as shown in
Figure 1
.
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533 superbrightleds.com
Specifications
Installation
Input Voltage
100~277 VAC
Total Power
95 Watts
Lumens
10000 lm
Color Temperature
4000K
CRI
72
Efficacy
105 lm/w
Temperature Range
-40° ~ 122° F (-40° ~ 50°C)
Dimensions
L13.38” x W13.38” x H4.62” (34 x 34 x 11.7cm)
Weight
15 lbs 8oz (3983g)
Warranty
5 years
Included Parts
Canopy Light (FLD-CNL-60005-100W)
1 - LED Canopy Light
1 - Mounting Bracket
4 - Mounting Bracket screws
User Manual
Part Number:
Jbox
Ceiling
Mounting Bracket
Mounting Bracket
Screws
Junction Box
Screws
Additional
Mounting Holes
Step Bracket (Mounting
Screw Contact Point)
Canopy Light
Figure 1.
5yr
