Setting
Sensitivity
Time
Light
Standby Level
Standby Time
Switch Pair Position
1 and 2
3 and 4
5 and 6
7 and 8
9 and 10
20%
10 seconds
disabled
0
always on
50%
1 minute
10 lx
10
1 minute
75%
5 minute
30 lx
30
30 minute
100%
15 minute
50 lx
50
60 minute
Fixture-Mounted Motion Sensor
4400 Earth City Expy, St. Louis, MO 63045
866-590-3533 superbrightleds.com
Rev Date: V1 07/15/2021
Model
BRI819P-B-D
Maximum Detection Radius
30 ft (9.14 m)
Maximum Mounting Height
40 ft (12.2 m)
Operating Temperature
-40°–167° F (-40°–75° C)
Dimming
0–10 V
¹
¹
Lights that use a 1–10 V dimming driver will not completely turn off when at the zero setting on the sensor.
Specifications
Safety and Notes
• Product should be installed and serviced in accordance with applicable
national, state, and local building and electrical codes.
• To reduce the risk of electric shock, ensure that the main power
source and circuit breakers are switched off before performing
any installation or wiring procedures.
Sensitivity
adjusts detection area.
Time
adjusts the amount of time between when motion is detected and when the light enters standby mode.
Light
adjusts the daylight threshold which allows the light to stay off if motion is detected and the room is already sufficiently illuminated.
Standby Level
adjusts the dimming level of the light during standby mode. It should be noted that “0” setting on a 1–10 V light will result in the
light being set at 10% as the driver in this case cannot dim beyond this level.
Standby Time
adjusts the amount of time the light stays in standby mode before shutting off completely.
Important: Read all instructions prior to installation.
BRI819P-B-D
User Manual
DIP Switch Settings
1 2 3 4 5 6 7 8 9 10
UP
1 2 3 4 5 6 7 8 9 10
UP
1 2 3 4 5 6 7 8 9 10
UP
1 2 3 4 5 6 7 8 9 10
UP
1 2 3 4 5 6 7 8 9 10
UP
Check product label for specific electrical
specifications related to installation.
Improper installation will void warranty.
