superbrightleds ALKW5-RGB45, Instructional Sheet, Page: 1 / 2

Instructional Sheet
Part Number:
4400 Earth City Expy, St. Louis MO 63045 866-590-3533 support@superbrightleds.com
ALKW5-RGB45
Important: Read all instructions prior to installation.
Diagram 1
Remote Battery Replacement
1. Remove three philips head screws and remove the button panel.
2. Carefully remove battery and replace with new.
3. Reposition button panel then insert and tighten screws
1. Connect strips to the connection box then connect to the Adapter Cable with
the “To Splitter” arrow towards the Splitter Cable. Connect the other end of the
Adaptor Cable with the “To Controller” arrow towards the Controller. Temporarily
apply power to the controller and test strip locations for proper lighting effect.
2.
Mark the desired location of the strips. Mount strips using double sided tape
or silicone in desired location and away from heat sources and moving parts.
3. Mount controller in a dry location away from heat sources and moving parts
and route power wires to power source then connect. Route white antenna wire
away from metal objects for maximum operating range.
Multi Color 5 Piece Accent Light Kit
5 - 5” Weatherproof Accent Light Strips
1 - RF RGB Accent Light Controller (RCW-RFRGB)
1 - RF Wireless Keychain Remote (RCW-RFR)
1 - Adapter Cable (LC4 to LC4)
1 - Splitter Cable
1 - 12V 27A Battery
Parts Included
Installation
Specifications
RGB LED Flexible Light Strip
5-way
Splitter
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
RGB LED Flexible Light Strip
5-way
Splitter
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
V+
G R B
Battery
OR
CPS connector
(CPS-F2ST)
Fuse 3A
1/4” Snap Spades
Power Supply
(CPS-12VDC-50W)
White
Antenna
Black Ground
Blue
Brake
Override
To Brake
Switch
To Splitter To Controller
Adapter Cable
RF Controller
RCW-RFRGB
To Splitter
To Controller
Adapter Cable
RCW-RFRGB
Black
Ground
Red
Power In
Blue
Wire
RF Controller
Running Light Cicuit (+)
Ground
White
Antenna
PSC-164
Brake Light
Circuit (+)
Input Voltage 9~14.5 VDC
Controller Output Current 3 x 1A Maximum
Fuse Size 3A
Operating Temperature -4 ~149° F (-20~65° C)
Strip IP Rating Weatherproof IP65
Static Color Dynamic Modes 2
Seven Color Dynamic Modes 2
Static Colors 18
Override Mode 1
Brightness Levels 5
Remote Battery 12V 27A x 1
Remote Range 33 Feet (10m) Maximum
Remote Frequency 315 MHz
FCC ID 2AFXS-JX-R001
Warranty 2 Years
Button Functions
Cycles up through 18 single color modes and two 7 color modes.
Press and hold for dimming 80%, 60%, 40%, 20% and back to
100% during single color modes.
Activates Flash Modes during single color modes. Switches
between Flash/Flash/Long Pause and Flash/Flash/Short Pause
during flash modes. Increases cycle speed during 7 color modes
Activates Fading Mode during single color modes. Decreases
cycle speed during 7 color modes.
On/Off
Hold for 6 seconds to return to Mode 1 (Static Red)
RCW-RFR
Remote comes paired to the controller. Use the following procedure if additional
remotes are required.On power up, LEDs will be green indicating pairing mode
for three seconds. During green pairing mode, press button “A” then “B” to pair a
new remote.
Remote Pairing
Remote Buttons
Wiring
Output Connector Polarity Purpose
Black Positive (+) Common Anode
Red Negative (-) Red LED Cathode
Green Negative (-) Green LED Cathode
Blue Negative (-) Blue LED Cathode
Input Wires Polarity Purpose
Black Negative (-) Ground In (-)
Red Positive (+) 9~14.5 VDC Power In (+)
Blue (see below) Positive (+) 9~14.5 VDC Red Override Signal In (+)
Blue wire activates red single color mode at full brightness while voltage is applied.
Use for brake override if required. Works as brake override even when controller is
in standby mode.
Slide Cover