Superabrasive
Owner’s Manual Original Language – Lavina
®
V20-X
08/2017
3
1. GENERAL INFORMATION
This owner’s manual is intended for the operator of the Lavina
®
V20-X machine, the servicing technician as well as for
anyone involved with operating or servicing the machine. We recommend that you read the instructions very carefully
and follow them strictly. The manual includes information about assembling, using, handling, adjusting and maintaining
your Lavina
®
V20-X concrete dust collector.
Manufacturer
Superabrasive was founded in 1987, as a manufacturer of high quality diamond tools for the stone and concrete
industry. Today, Superabrasive is one of the world’s leading companies in the production of diamond tools and floor
grinding machinery. At Superabrasive, we strive to deliver the very best solutions to our customers, and enable them to
work more efficiently.
General Description
The
Lavina® V20-X vacuum cleaner is designed for sucking and separating dry, non-combustible/non-explosive dust.
Dust laden air is sucked through at high speed via the suction hose. The air is slowed down by the cyclone and coarse
dust particles are separated by centrifugal force and gravity. Air and finer particles then pass through the filter system of
the primary filter and the HEPA filter, where the dust is separated. The machine is designed to clean the primary filter
by impulse reverse air flow. The separated dust accumulates in the cyclone until the machine is switched off, when it
drops through the bottom flap into the plastic bag.
WARNING!
The Lavina
®
V20-X machine is manufactured and fitted for the above-mentioned applications only! Every other use may
possess risks to the persons involved.
2. MAIN COMPONENTS AND CONTROLS
1) Motor head assembly
2) Lighted Power switches
3) Vacuum gauge
4) Latches (4 total)
5) Filter chamber
6) Vacuum handle
7) Waste container release handle (2 total)
8) Removable LONGOPAC
®
waste container
9) Caster wheel (2 total; 1 locking)
10) Fixed wheel (2 total)
11) Trolley frame
12) Vacuum hose with Cam Lock
13) Motor Head handle
14) Suction pipe coupling point
15) Filter System handle
Figure 1.1
