Superabrasive LAVINA 38GR -X, User Manual

Page: 29 / 58

Superabrasive
Owner’s Manual Original Language – Lavina
®
38GR-X 08/2017
29
Disconnect the connection to the battery (Fig. 8.3.2), the propane hose (Fig. 8.3.3), and the connections to the LP Fuel
Lockoff valve (Fig. 8.3.3). Unplug the engine cable plug from the control box (Fig. 8.3.5) and dismount the Throttle
Cable (Fig. 8.3.4). Disconnect the water and vacuum hose from the main head by pulling it out (Fig. 8.3.7) (Fig. 8.3.8).
Release the pin sets (Fig. 8.3.9) and dismantle the third wheel. Release the pin sets which attach the head to the
carriage and remove the carriage from the main head (Fig. 8.3.10).
8.4 DISMOUNTING/MOUNTING THE ENGINE
Separate head from carriage (see previous chapter). Remove front and back belt protection (Fig. 8.4.1). Loosen the
motor base plate (Fig. 8.4.2), release the tension device (Fig. 8.4.3), and take out the belt (Fig. 8.4.4). Take off the
engine (Fig. 8.4.4).
Figure 8.3.7 Figure 8.3.9 Figure 8.3.8
Figure 8.3.10
Figure 8.3.4 Figure 8.3.5
Figure 8.3.6