Superabrasive
Owner’s Manual Original Language – Lavina
®
32G-X/GTX
7/2019
19
5. TOOLS AND ACCESSORIES
TOOL HOLDER KEY
The tool holder key (Fig. 5.1) is used for adjusting, mounting and dismounting of the tools.
Always use the key for mounting.
Item number is A03.00.00.00
FOAM PLATE
Diamond tools with Velcro are mounted on the foam plat
e 9“(Fig.5.2).
The foam plate is mounted on the flexible backer plate.
Item number is LV-9-FP-S
SECURITY PLATE FOR QUICKCHANGE PADS
Plate (Fig.5.3) used to sec
ure the “Quickchange” pads.
Item number is A38.00.01
THIRD WHEEL
With the
Lavina® 32GX, it is possible to install a third
wheel to allow better handling. It is purchased as a full
assembly -
item number L32S-04.00.00
(shown on
fig.5.4)
Mounting/dismounting with pin assembly (see fig. 5.4-
1).
While working the operator can turn the wheel support
90
º (fig.5.4-7). Pull out the handle, turn it 90°and fix it
again.
Figure 5.1
Figure 5.4
Figure 5.2
Figure 5.3
19
