Superabrasive Lavina 25LM-X, User Manual

Page: 6 / 41

Superabrasive User Manual Original Language Lavina® 25LM-X / Lavina® 25LM-X-HV 1/2016
VACUUM CONNECTION
A connection for a vacuum dust extractor is located on the carriage. The Lavina® X machine does not include a vacuum dust
extractor. The customer must purchase the vacuum dust extractor separately. The hose of the vacuum extractor must be Ø 50
mm and can be glided over the pipe. The vacuum dust extractor must be adapted for floor grinders and have a minimum air
displacement of 320m3/h with a negative vacuum of 21 kPa.
TECHNICAL DATA
VIBRATIONS
The vibrations of the machine are within the limits of directives and harmonized standards from the European Union when the
Lavina® X is operated with the recommended tools and in normal conditions.
SONOROUS EMISSIONS
The sonorous emissions are within the limits of directives and harmonized standards from the European Union when the
Lavina®X is operated with the recommended tools and in normal conditions. However, as previously stated, the operator must
wear ear protectors.
LABEL DATA
The data on the label provides the correct Voltage and kW (needed for operational purposes);
Weight (needed for transportation purposes); production year and serial number (needed for maintenance purposes).
CUSTOMER SERVICE
For customer assistance and technical support call your local distributor or call Superabrasive Inc. at 1-800-987-8403 or visit us at:
www.superabrasive.com , where you can download a copy of this manual.
2. SAFETY INSTRUCTIONS
RECOMMENDED USE
The Lavina® X machine is designed and manufactured to grind and
polish concrete, terrazzo, and natural stone floors. It can be used
for renovation as well as for polishing. The machine is designed for
dry or wet use. When using it dry, use a vacuum of appropriate size.
For more information, please refer to the chapter on handling the
vacuum connection.
PROHIBITED USE
The machine MUST NOT be used:
•
For applications different from the ones stated in the general
description chapter.
• For non-suitable materials. In environments which:
-
Possess risks of explosion,
-
Possess high concentration of powders or oil substances in
the air,
-
Possess risks of fire Feature inclement conditions,
-
Possess electromagnetic radiation.
PREPARATION FOR WORK
Make sure that:
•
You have closed the work area, so that no person unfamiliar
with operating the machine can enter the area.
•
The tool plate and tools are adjusted to the machine
properly.
• There are no missing parts of the machine
•
The machine is in upright working position.
•
The protection devices are working properly.
•
The electrical cable is free to move and follow the machine
Lavina® 25LM-X Lavina® 25LM-X-HV
Voltage/Hz 3 ph x 200-240V/50-60Hz 3 ph x 440-480V/50-60Hz
Amperage Max 45 Amps Max 30 Amps
Power 11 kW 15 HP 11 kW 15 HP
Tool holder rpm 300-1100 rpm 300-1100 rpm
Working width 655 mm 655 mm 655 mm 25.8”
Tool diameter (QC Plate) 3x 225 mm 3x 225 mm 3x 225 mm 3x 9”
Weight 349 kg 349 kg 349 kg 769lbs
Grinding pressure 180 kg 180 kg 180 kg 397 lbs
Additional weight max 2x 29 kg max 2x 29 kg max 2x 29 kg max 2x 64 lbs
Application wet and dry wet and dry
Vacuum hose port Yes Yes
Water tank capacity 20 l 20 l 20 l 5.2 gal
Water feed with pump (peripheral and front) with pump (peripheral and front)
Cable length 17.4 m 17.4 m 17.4 m 57 ft
Machine LxWxH 1800x690x1265 mm 1800x690x1265 mm 1800x690x1265 mm 71x27.2x50”
Packing Crate LxWxH 1480x820x1560 mm 1480x820x1560 mm 1480x820x1560 mm 58.3x32.3x61.5”
6