Superabrasive
User Manual Original Language
Lavina® 20G-X
4/2018
15
-
Battery Voltage
-
Tachometer
-
Options Menu
LED ALERTS & RESETTING SERVICE INTERVALS
The Fuel-Minder will alert you when service is due by blinking a red LED within 3 hours of the specified interval and
displaying “Service Due” on the LCD screen. When you see this light, simply scroll through your menu to see which
service item is due. To reset a specific interval, just scroll to that particular screen (for example, Oil Change), then hold
the
SELECT
button for 2 seconds until you see the reset prompt ,then press the
+
button to reset that interval.
OPTIONS MENU NAVIGATION AND USE
OPTIONS MENU
To enter the options menu, simply scroll until
Options Menu
is displayed on the screen, then press
SELECT
. The first
option displayed by default is
Add Password
. Use the
+
or
–
buttons to scroll and view other options. To exit the
options menu, scroll until you see
EXIT OPTIONS
, then press
SELECT.
Add Password-
This option allows you to add a password that prevents unauthorized users from resetting service
intervals or performing a factory reset. This is a 4-digit pin that you set.
Change Password
-Allows you to change your password, if one is saved. Note: This option is hidden unless a password
has been created.
Remove Password
-Used to disable the password feature, if a password is saved. Note: This option is hidden unless a
password has been created.
Factory Reset
-CAUTION, this option will erase all memory and restore your device to factory condition. This also
allows for resetting the total engine hours. Password required if set.
Factory Unlock
-This option is only used by Superabrasive and requires a factory assigned pin number to activate.
Tach Settings
- This allows you to adjust the tachometer for a carbureted or fuel injected engine. It should come pre-
set to the correct option and will not require changes.
Equipment Hours
- This displays the total number of hours on your equipment and is non-resettable.
Date of Purchase
-This can be used by the user or dealer to record the equipment purchase date. To enter the date,
hold
SELECT
for 2 seconds; a cursor should appear under the MM. Use the
+
and
–
buttons to change the month field,
then press
SELECT
to move to the Day field. Again, use the
+
and
–
buttons to select the desired day. Once you have the
desired date, hold
SELECT
for 2 seconds and a prompt to save the information will appear.
Engine Info
- To view the engine model/serial information, scroll to
Engine Info
in the Options Menu, and press
SELECT
. To edit this information, hold
SELECT
for 2 seconds. Then use the
+
and
–
buttons to select the appropriate
letters and numbers. Press
SELECT
quickly to move the cursor, or hold
SELECT
for 7 seconds to save/exit.
Equipment Info
- To view the equipment model/serial information, scroll to
Equipment Info
in the Options Menu, and
press
SELECT
. To edit this information, hold
SELECT
for 2 seconds. Then use the
+
and
–
buttons to select the
appropriate letters and numbers. Press
SELECT
quickly to move the cursor, or hold
SELECT
for 7 seconds to save/exit.
Job Timer
- The job timer acts as a stopwatch, but only starts and stops when the engine is turned on/off. This allows
you to accurately time how long your engine runs for a particular job.
Exit Options
-Returns to the main menu, and default screen (Engine Hours).
