Superabrasive
User Manual Original Language
Lavina® 20G-X
4/2018
12
LIFTING THE MACHINE FROM WORKING TO TOOL MOUNTING POSITION
Lock the weights in upward position. Put the handles of the carriage
as shown on (Fig. 3.9).
Ensure that the
water tank is empty before
flipping the machine. Push the handles and flip in position shown on
Fig. 3.10.
If necessary, help by placing your foot on the heel near the
gas bottle
.
LIFTING
Lifting the machine by crane is possible by using the handles of the weights.
(see fig. 3.11). The design is rated only for the weight of the machine. Do not lift any other
loads on the machine. Always use hoisting equipment rated for 300 kg (660 lbs) or greater.
STORAGE
Always store the LAVINA® X machine in a dry place. Never transport the
LAVINA® X machine unprotected; it may be damaged if transported unprotected
and exposed to rain or snow.
When the machine is in storage and
the temperature may fall down to or
below 32F (or 0
o
C) you should empty the water from the
system:
-
Pull out the hose of the tank (Fig.3.7) /The system is
made of quick connect fittings and allows easy
dismantling to release water./
-
With compressed air blow out the water from the
system in the two positions of the turn-cock.
Figure 3.4
Figure 3. 5.
Figure 3.6
Figure 3.9
Figure 3. 10
Figure 3.7
