eFlo 2.0 Electronic Flow Meter Operations Manual
Super Systems Inc.
Page 27 of 39
Web Interface
The eFlo meter is equipped with a web interface that can be accessed using an Internet web
browser such as Mozilla Firefox, Google Chrome, or Microsoft Internet Explorer. In order to
open the web interface with a web browser, you will need to know either the IP address or the
hostname of the web interface. SSi recommends asking an IT engineer or network
administrator to set up the web interface prior to use.
Using the Web Interface
To access the web interface, open a web browser, and in the location bar, enter the IP address
or name of the webserver. The main screen will then appear, as shown in Error! Reference
source not found..
Figure 17: Main Screen of Web Interface
The web interface features several screens. Note that some screens require a login and
password. The default login is username admin with password 2 (unless otherwise specified by
the customer at the time of order).
Main. This screen shows status information such as flow rate, setpoint, and which LEDs
are illuminated on the unit, and the amount of total flow since the previous reset.
Instrument Information. This screen shows eFlo model number, unit serial number, and
software version number.
Diagnostics. This screen displays information on pressure differential, inlet pressure,
temperature, and density.
Basic Configuration. The Basic Configuration screen displays, and allows you to change,
basic operating parameters for the eFlo unit.
Instrument Configuration (login and password required). The Instrument Configuration
screen displays, and allows you to change, operating parameters for the eFlo unit.